Australia

Quality Wood Finishing Products

If a jobís worth doing - do it with RUSTINíS

RUSTINíS ACRYLIC CERAMIC GLAZE

Back to Products page


Specially formulated for use in china restoration. 
Will not crack, craze or yellow in time, stays completely clear.

A one-part quick drying water-borne Ceramic Glaze, can be applied by brush or air-brush. Can be diluted up to 10% for air-brush application.

Coating is usually touch dry within 30 minutes to 1 hour, depending on the ambient temperature. Articles may be re-coated after 1 -2 hours.

Coated articles can be handled 2 hours after the final coat but will take 10 days to harden if not stoved.

For extra hardness and water resistance the product may be stoved. The coated article should be left to stand for 60 minutes or more to allow the water to evaporate before stoving

Stove for 45 minutes at 100 deg C, allow to cool to ambient temperature before the next coat is applied.

Artists dry powder pigments can be mixed with Rustin's Acrylic Ceramic Glaze. Artists acrylic colours can also be used but it is recommended that a test for compatibility is carried out because of the differences between manufacturers formulations. 

Rustin's Ceramic Glaze is compatible for use over some cellulose, acrylic, epoxy and oil based paints. Always test for compatibility first. 

Coverage: 1 litre covers approx. 12 - 14 sq.mt with one coat.


250ml  $39.50
1 Litre  $129.00

www.rustins.com.au - Rustin's Australia - Official website 

Sole Australian Importer & Distributor since 1980.